2019-10-29-mod-jam

VCO 1 is fed pitch CV from Marbles through the Integrator. Audio is taken from the saw output into VCA 2, which is fed a CV from LFO 1 running a slow sine wave. VCA 2 then goes to the mixer.
VCO 2 is fed pitch CV from Marbles and audio is taken out from it to the Sync Input of VCO 3. VCO 3 is fed pitch CV from a slightly faster sine from LFO 2 and also fed CV from ADSR 1. Audio is taken from the square output into VCA 1, which is fed a CV from ADSR 1. VCA 1 then goes to the mixer.
The TB-08 is also attached to the mixer, and the 3 signals are mixed and sent through the spring reverb. A slight echo was added in post-production.
Marbles’ settings are pretty wide open.

Leave a comment

Your email address will not be published. Required fields are marked *